Mineral deposits can cause threaded fitting (shower heads, hose bibs, etc.) to become stuck over time and very hard to remove.  Plumbers in Henderson see this trouble a lot due to the hard water in the valley.  The older the habitation, or the length of fourth dimension the fixture has been in place will likely determine how hard it will be to remove that fixture when information technology needs to be repaired.

  • Wrench and/or pliers
  • Prophylactic mallet
  • Blow dryer / heat gun / torch (for metal merely)
  • Calcium remover (such every bit Lime Abroad) / Distilled white vinegar

There are a few things you can effort to do yourself before calling out a plumber.

  • Try to tighten the stubborn plumbing fixture with a wrench or pliers. Hopefully, this will loosen any calcium or mineral deposits allowing you lot to easily remove the fixture.  If it doesn't plough, use a bit of force to tap the fixture with a condom mallet.
  • Next, drain the water from the line and try to apply some oestrus with either a hair dryer or heat gun. Hopefully, the threaded expanse will expand allowing y'all to remove the fixture with ease.  If information technology is a metal fixture, you can attempt to use a propane torch (with caution to protect any combustible items around your working area.  Information technology is too recommended to accept a bucket of water and fire extinguisher nearby).
  • Lastly, a calcium or rust remover may exist able to remove hard water build upwards. Distilled white vinegar is also used often to remove calcium deposits.

If none of these procedures piece of work, you lot may demand to call a plumber to help you.  It's a good idea to try to tackle these repairs during normal business hours in case you run across an emergency situation (such as water needing to exist close off to the property due to a cleaved pipe).